Subnetik will be at the Dubai International Food Safety Conference (DIFSC) 2026 at the Dubai World Trade Centre from 16 to 18 November. Our Technical Director, Saful Alsened, is attending all three days and setting aside time to meet food businesses that want to talk about using IoT sensors for cold chain monitoring, temperature compliance and food safety.
If you manage cold rooms, refrigerated transport, central kitchens or retail chillers in the UAE, this is a good chance to see what real-time monitoring looks like in practice. Book a meeting with Saful before his calendar fills up.
DIFSC 2026 at a glance
| Event | 20th Dubai International Food Safety Conference (DIFSC) |
|---|---|
| Dates | 16 to 18 November 2026 |
| Venue | Dubai World Trade Centre, Sheikh Zayed Road, Dubai |
| Organiser | Food Safety Department, Dubai Municipality |
| Who attends | Regulators, food industry leaders, researchers and academics |
| Subnetik contact | Saful Alsened, Technical Director |
| Meet us | Book a meeting on Calendly or message Saful on LinkedIn |
DIFSC is one of the region's largest food safety gatherings. The 2025 edition ran under the theme "Technology and Innovation in Food Safety" and drew more than 3,500 participants and 225 speakers from 70 countries, according to Dubai Municipality. Full event details are on the official conference site.
Why food safety in the UAE is a cold chain problem
In the UAE, most food safety risk sits in the gaps between handoffs. Chilled and frozen products often arrive by sea or air, move through a port or free zone, sit in a cold store, travel in a reefer truck and end up in a kitchen or shop chiller. Every handoff is a moment where temperature can drift.
The climate makes those moments count. With summer temperatures regularly above 45°C, a reefer door left open during unloading or a cold room compressor that trips overnight can push stock out of its safe range within minutes, not hours.
The catch is that most businesses only find out after the fact. A manual log filled in twice a day cannot show what happened at 3 a.m., and by the time a problem is spotted, the stock may already be unsafe, unsellable or both.
What is IoT cold chain monitoring?
IoT cold chain monitoring uses wireless sensors to measure temperature (and often humidity, door status and location) in cold rooms, freezers, reefer trucks and display chillers around the clock. Readings are sent automatically to a cloud dashboard, which alerts the right person the moment conditions move outside a set range and keeps a time-stamped record for audits.
In practice, a typical setup has three parts:
- Sensors placed in each cold room, freezer, chiller or vehicle.
- A gateway or network connection (such as LoRaWAN, cellular or Wi-Fi) that carries readings off-site.
- A monitoring platform that shows live status, sends SMS or email alerts and stores the data history.
Where it makes the biggest difference
- Cold stores and distribution centres: continuous coverage across every room, plus early warning of compressor or power failures.
- Refrigerated transport: temperature and location for each trip, so you can prove product stayed in range from pickup to delivery.
- Central kitchens and F&B outlets: automatic logging for walk-ins and reach-ins, which frees staff from clipboard checks.
- Retail and supermarket chillers: visibility across many stores from one screen, with alerts before stock has to be written off.
- Food manufacturing: monitoring of raw material storage, blast chilling and finished goods holding.
See the sensors and gateways we supply for these setups in our cold chain monitoring collection. See also: Food & Beverage Processing, Storage & Cold Chain
Manual temperature logs vs IoT monitoring
The difference is not just convenience. It is whether you see a problem while you can still fix it.
| Manual logs | IoT cold chain monitoring | |
|---|---|---|
| How often readings are taken | A few times a day, by staff | Every few minutes, automatically |
| Overnight and weekend coverage | Usually none | Continuous |
| When you learn about a problem | At the next check, or after a complaint | Within minutes, by SMS or email alert |
| Audit records | Paper or spreadsheets, prone to gaps and errors | Time-stamped digital history, ready to export |
| Visibility across sites | One location at a time | All sites and vehicles on one dashboard |
| Staff time | Daily checks and paperwork | Reviewing alerts and reports only |
Why monitoring-only IoT is safer than a connected fridge
In October and November 2026, supermarkets and food shops across Europe had their fridges and freezers remotely taken over. Attackers pushed temperatures up and stores in several countries threw away tonnes of food, with one Swedish supermarket reporting its units had been set to 50°C (AP, BBC). Investigators linked the attacks to outdated remote refrigeration controllers, many of them exposed to the internet and still using default passwords.
The common thread was control. The connected part of each fridge could change its settings, so anyone who broke in could too.
Monitoring-only IoT works differently:
- It watches, it does not control. Wireless sensors measure and report. They are not connected to the fridge's controls, so they cannot change a setpoint, switch off a compressor or shut a unit down.
- It is an independent safety net. If a refrigeration controller fails or is tampered with, a separate sensor still sees the temperature climb and alerts your team. You are not relying on the system that has gone wrong to report on itself.
- It is the more sustainable route. Sensors retrofit to the cold rooms, chillers and trucks you already own, so there is no need to replace working equipment with new smart fridges. That means less equipment wasted, lower upfront cost and one view across every brand of unit.

Security basics still apply to any connected device: choose sensors and platforms with encrypted data, unique passwords and regular updates. Saful is happy to talk through what to look for.
What to talk to Saful about at DIFSC
You do not need a project brief to book time. Most conversations start with one of these questions:
- We still use paper logs. What would it take to move to automatic monitoring?
- Can sensors work inside our existing cold rooms and trucks without rewiring?
- We read about the supermarket fridge hacks. How do we monitor without adding that risk?
- How do alerts reach the right person at 2 a.m., and what happens if no one responds?
- What records would an inspector or auditor expect to see, and can the system produce them?
- How would we roll this out across several branches or a whole fleet?
- What does a small pilot look like before committing to every site?
Saful can walk you through options for your setup, explain how monitoring typically works for operations like yours and point you to the right hardware.
Book a meeting with Subnetik at DIFSC 2026
Spaces are limited across the three conference days. To book a slot between 16 and 18 November, book a time with Saful on Calendly. Not attending? We are happy to arrange a call or a visit after the conference.
We will also share our key takeaways from DIFSC 2026 on this blog after the event, so check back or follow Subnetik on LinkedIn.
Frequently asked questions
When and where is the Dubai International Food Safety Conference 2026?
DIFSC 2026 takes place from 16 to 18 November 2026 at the Dubai World Trade Centre. It is organised by the Food Safety Department of Dubai Municipality.
What is cold chain monitoring?
Cold chain monitoring is the continuous tracking of temperature, and sometimes humidity, for chilled and frozen products as they are stored, transported and displayed. It confirms that food stays within its safe temperature range from supplier to customer.
How does IoT improve food safety?
IoT sensors record conditions automatically, every few minutes, and send instant alerts when temperatures move out of range. This lets teams act before food becomes unsafe and gives them reliable digital records for inspections and audits.
Can IoT temperature sensors be added to existing cold rooms and trucks?
In most cases, yes. Wireless, battery-powered sensors can be fitted to existing cold rooms, freezers, chillers and reefer vehicles without rewiring. The right sensor and network depend on the site and the vehicle.
Can a hacker switch off my fridge through an IoT temperature sensor?
Not with a monitoring-only sensor. These sensors measure and report conditions but have no connection to the fridge's controls, so they cannot change its temperature settings or turn it off. The recent attacks on European supermarkets targeted refrigeration controllers that could be operated remotely.
How do I meet Subnetik at DIFSC 2026?
Book a slot with Saful Alsened using the booking link above, or message him on LinkedIn. If you cannot attend, we can arrange a call after the conference.
